Free 3D file Black and Decker 40v battery charger holder wall

This is a wall mount cradle for a Black & Decker 40v battery and charger. (This might work on a B&D 36v as well, but I did not have a battery or charger to test.) I purchased a 40v B&D chain saw that came with small standard charger. I wanted to mount it to the wall with the rest of my batteries and chargers. I had used Calidus80’s design for my 20v batteries so I decided to remix it for a 40v charger and battery. I have 4 of his 20v chargers lined up in my tool charging area. I used PLA and did 50% infill, but you can probably get away with 20%. The print time difference is about 1 hour and 20 minutes on Ender 5 Pro. (3h 20m for 20% vs 4h 40m for 50%) I used a .8 nozzle for speed. The charger is a snug fit in the cradle, and you do not need to fasten it in if you hold the charger down with your thumb on one hand and pull the battery out with the other hand. If that is not secure enough for you, I added slots and indentations where you can add a zip tie to hold the charger into the cradle. I also put two screw holes so you can clamp it down with 2 M3X10 bolts like the original design, but the chargers are different, and they don’t hold as good as the zip tie does. There are three screw holes to mount it on a wall, I only needed two of the holes to mount it on the edge of a shelf.

Fits all BLACK+DECKER 36v or 40v Max lithium ion tools Charge indication light lets you know when your battery is charged Charges BLACK+DECKER 36v or

BLACK+DECKER 40V MAX* Battery Fast Charger (LCS40)

charger holder 3D Models to Print - yeggi - page 5

charger holder 3D Models to Print - yeggi - page 6

The Black + Decker BDCAC202B 20v Lithium 2amp Charger allows you to charge all Black + Decker 16-Volt MAX and 20-Volt MAX lithium ion slide batteries. Fast charger recharges 1.5Ah Lithium slide pack batteries in 45 minutes or less The maintenance mode automatically optimizes charging for longer battery life.

Black+decker 20V Lithium-Ion Battery Charger BDCAC202B

dewalt charger mount 3D Models to Print - yeggi

▷ 20v lithium black and decker battery 3d models 【 STLFinder 】

Battery charger is quick and easy to mount or remove as needed Multiple mounting slots for maximum mounting options. Mounting hardware is included!

Precision 3d Prints compatible with BLACK+DECKER Wall Mount Bracket 20V MAX 2 Amp Charger (compatible with BDCAC202B)

POWERWORKS XB 20V / 40V 1.5A Charger CAP802 : Tools & Home Improvement

Honeycomb Wall Black and Decker 40V Charger Holder by dereki22, Download free STL model

Free STL file Black & Decker Wall mount 🔋・3D print design to download・Cults