Steel-It Polyurethane Aerosol Paint - STEEL GRAY 1002B – TMR Customs

Price: $ 15.50

4.8(186)

***STEEL-IT CAN ONLY BE SHIPPED VIA UPS STANDARD GROUND! IF YOU CHOOSE A DIFFERENT SERVICE LEVEL WE WILL PROCEED BY SHIPPING YOUR ORDER VIA UPS STANDARD GROUND*** Aerosol coverage examples: 1 can per wheel/rim. 2-4 cans per axle housing (depending on housing size). 20-24 cans per Ultra4 chassis. 26-30 cans per rock bou.
For 4x4 off-road parts, TMR Customs has some of the highest-quality products in the market. Customize your vehicle, get outside and start off-roading today!.
***STEEL-IT CAN ONLY BE SHIPPED VIA UPS STANDARD GROUND! IF YOU CHOOSE A DIFFERENT SERVICE LEVEL WE WILL PROCEED BY SHIPPING YOUR ORDER VIA UPS STANDARD GROUND*** Aerosol coverage examples: 1 can per wheel/rim. 2-4 cans per axle housing (depending on housing size). 20-24 cans per Ultra4 chassis. 26-30 cans per rock bouncer chassis. 12 cans per side by side (SXS) chassis. 30-36 cans per trophy truck chassis/suspension arms. The STEEL-IT Polyurethane Coating System features a unique stainless steel leafing pigment, and provides optimum weather, abrasion, and corrosion resistance in off-road racing applications. The easy to apply system yields a hard, non-toxic, metallic finish that protects a multitude of metallic and non-metallic surfaces from ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high-pressure washdowns. This single component coating does not require complicated mixing. Apply it directly from the can, it is air dried and requires no baking or heating. USDA-approved for use in the food processing and handling industry where incidental food contact may occur, STEEL-IT Polyurethane #1002 blends polyurethane resin with Type 316L stainless steel leafing pigment to produce a rugged, non-toxic, satiny metallic finish. Application Guide: A 14oz aerosol can of STEEL-IT Polyurethane Aerosol (black and gray) has practical coverage of roughly 15 square feet per aerosol can, when applied at the recommended 16 mils wet film thickness to achieve 3 mils (.003” or 75 microns) dry film thickness (DFT) per coat. We recommend a minimum of 4 heavy coats to achieve proper build up.Apply direct to metal with no primer if you wish to weld through the product in the future. Steel-It paint is weldable and does not need to be removed to make repairs or additions to chassis, roll cages, suspensions, etc.