AOSONG DHT22 Temperature Humidity Sensor - ElectroPeak

Looking to buy AOSONG DHT22 Temperature Humidity Sensor? This Temperature & Humidity is available at the lowest price-guaranteed. Buy now at ElectroPeak!.
DescriptionThe DHT22 is a basic and low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the moisture and temperature with a digital signal output on the data pin (no analog input pins needed).The first pin on the left is 3.3-5.5V power and the second pin connects to a data input pin and the right pin is connected to the ground. Although it uses a single-wire to send data, it is not compatible with Dallas one wire. In case you need multiple sensors, each one must have its own data pin.In comparison with DHT11, this sensor is more precise, more accurate and works in a higher range of temperature/humidity, its temperature measuring range is from -40 to +80 degree Celsius with +-0.5 degrees accuracy, while the DHT11 temperature range is from 0 to 50 degrees Celsius with +-2 degrees’ accuracy. Besides, the DHT22 sensor has a better humidity measuring range, from zero to 100% with 2% accuracy, while the DHT11 humidity range is from 20 to 80% with 5% accuracy. But it is larger and more expensive.They use the humidity sensing component to measure humidity which has two electrodes with moisture holding substrate between them. So as the humidity changes, the conductivity of the substrate changes or the resistance between these electrodes changes. This change in resistance is measured and processed by the IC which makes it ready to be read by a microcontroller.FeaturesModel: DHT22Input Voltage: 3.3V ~ 5.5VOutput Type: DigitalTemperature Range: -40°C ~ 80°CTemperature Accuracy: +-0.5°CTemperature Resolution: 0.1°CHumidity Range: 0% ~ 100% RHHumidity Accuracy: +-2% RHHumidity Resolution: 0.1%Interface: 1 wirePin Number: 4 PinsSize: 25.1mm x 15.1mm x 7.7mmPinout:(When the Sensor is kept facing you, the leftmost pin is Pin 1)VDD: power supply (3.5V - 5.5V)SDA: serial data - bidirectional NC: NCGND: GND

AM2302 (wired DHT22) temperature-humidity sensor : ID 393 : $15.00 : Adafruit Industries, Unique & fun DIY electronics and kits

Interfacing DHT21 / AM2301 Temperature Humidity Sensor with Arduino

AM2302 SIP Packaged Temperature and Humidity Sensor-Sensor-Temperature and Humidity-Guangzhou Aosong Electronic Co., Ltd.

ESP32 -- DHT22 (AM2302) Temperature Sensor -- OLED Display

The sensor can be operated with both 3.3V and 5V, it is compatible for connection to all standard boards such as Arduino, RN-Control, Raspberry Pi and

Gowoops 2pcs DHT22/AM2302 Digital Humidity and Temperature Sensor Module for Arduino Raspberry Pi, Temp Humidity Gauge Monitor Electronic Practice DIY

Keyestudio DHT22 (AM2302)Temperature and Humidity Sensor for Arduino Uno r3

The sensor can be operated with both 3.3V and 5V, it is compatible for connection to all standard boards such as Arduino, RN-Control, Raspberry Pi and

Gowoops 2pcs DHT22/AM2302 Digital Humidity and Temperature Sensor Module for Arduino Raspberry Pi, Temp Humidity Gauge Monitor Electronic Practice DIY

Default Category

【Specification】Operational voltage: 3.3V/5V. Temperature range: -40~80℃, accuracy ±0.5℃. Humidity range: 0%~99.9%RH, accuracy ±2%RH. 【Multifunctional

seeed studio Grove Temperature Humidity Sensor Pro Module(AM2302/DHT22) Digital Interface 3.3/5V, Sensor for Temp(-40~80℃) Humi(0~99.9% RH) Monitor

Digital Temperature Humidity Sensor Module DHT22 - leetechbd

AM2302 SIP Packaged Temperature and Humidity Sensor-Sensor-Temperature and Humidity-Guangzhou Aosong Electronic Co., Ltd.

DHT22/AM2302 Digital Temperature and Humidity Sensor for arduino – Aideepen