Large Sawtooth Nailess Black - 1 3/4-Inch Tall and 1/4-Inch Wide
Price: $ 1.99
4.5(375)
About Large Sawtooth Nailess Black A self attaching, no-nail sawtooth hanger for wood frames. Supports up to 10 lbs Large nailess sawtooth frame hanger measures ¼” wide and 1 ¾” long, and is made of steel with a black oxide finish No additional hardware required – built-in prongs allow easy attachment on wood. 1/4“ of the prong should go into the wood for maximum support Hardened finish allows the sawtooth hanger to be hammered in without deforming Quick and easy installation – hang pictures, art, mirrors, and wall decor in just seconds Instructions 1) Lay the frame face down on a blanket or soft surface. 2) Install the sawtooth hanger at the center of the top rail, a bit down from the upper edge of the frame. The serrated edge should face down. 3) Use a small hammer to tap.
About Large Sawtooth Nailess Black
- A self attaching, no-nail sawtooth hanger for wood frames. Supports up to 10 lbs
- Large nailess sawtooth frame hanger measures ¼” wide and 1 ¾” long, and is made of steel with a black oxide finish
- No additional hardware required – built-in prongs allow easy attachment on wood. 1/4“ of the prong should go into the wood for maximum support
- Hardened finish allows the sawtooth hanger to be hammered in without deforming
- Quick and easy installation – hang pictures, art, mirrors, and wall decor in just seconds
Instructions
1) Lay the frame face down on a blanket or soft surface.
2) Install the sawtooth hanger at the center of the top rail, a bit down from the upper edge of the frame. The serrated edge should face down.
3) Use a small hammer to tap the nailess sawtooth hanger in place. Take care not to break the glass on the frame, if any, when hammering in a nailess sawtooth hanger.
4) In extremely hard woods, drill small pilot holes for the legs of the hanger.
5) When properly seated, the shoulders of a nailless hanger should rest on the surface of the frame rail, leaving approximately 1/8 gap between the back of the hanger and the surface of the rail.
6) Make sure that your nail in the wall is tight and secure before using it to hang the frame.
IMPORTANT NOTE: Always use a headed nail (not a brad) and position the frame on the nail so that the nail is caught firmly on the sawtooth hanger.
Small Nickel Sawtooths With Screws - Supports 7 Lbs - Picture Hang
National Artcraft® 1-5/8 Sawtooth Picture Hangers with Nails
OOK Large Self-Leveling Sawtooth Hanger Zinc 3 Pack - Picture
Qty 1000 1-7/8 Long Black Nailess Sawtooth Hangers
Nailess Sawtooth Hangers 2 for Softwood (Per 100 Sawtooth Hangers)
Sawtooth Picture Hangers, 100 Pcs Black Steel Photo Frame Hanging
1 5/8 inch long by 1/4 inch wide (41mm by 6mm) Sawtooth Picture Hangers - steel with zinc finish - silver Bulk Pack includes 100 sawtooth hangers and
Sawtooth Picture Hangers with Screws - 100 Pack - Small Sawtooth Hanger
Large Sawtooth Nailess Black - 1 3/4-Inch Tall and 1/4-Inch Wide
Large Sawtooth Nailess Black - 1 3/4-Inch Tall and 1/4-Inch Wide
ADS 100 No Nail Sawtooth Picture Hangers - 1 3/4 Inch - Brass
PERFORMORE Sawtooth Picture Hangers, 150 Pack Picture Frame
